industrial repair agent > metal copper rebuilding repair compound epoxy coatings

metal copper rebuilding repair compound epoxy coatings

BD114 metal copper rebuilding repair compound wear abrasion resistant ceramic epoxy coating

Product description of our BD114 copper metal anti abrasion wear epoxy ceramic coating
rebuilding repair compound:
It’s the high performance polymerization metal materials compounded by various alloy material and modified
toughening heat resistant resin,suitable for the repairing and rebirth of the brass, bronze casting and process
castings defects.The color after repairing is basically the same as the substrates,with the very high strength
and excellent wear&corrosion resistance and aging resistant properties,can do various mechanical processing
together with substrates.

Performance index:

product name	physical state	standard packaging	volume (cm3)	operational time limit (25℃)	usable time (25℃)
BD114 metal copper rebuilding repair compound epoxy coating	paste	250g/set Two-component	163	45min	24h

Main physical mechanical properties

color	density (g/cm3)	compressive strength (Mpa) GB1041-2008	tensile strength (Mpa) GB6329-2008	shear strength (Mpa) GB7124-2008	bending strength (Mpa) GB1042-1999	hardness （Shore D） ASTM-D-2556	working temperature （℃）
brass	152	92	37	27	51	87	-60～166

how to use:
Surface treatment: Do the coarsening treatment on the pending-repair surface and clean it by cleaning agent.

2.Configuration: According to the mass ratio A:B=6:1 or volume ratio A:B=4:1, make A and B two components
mix uniformly,then use it up within specified operation time limit.

3.Coating: Make the mixed-up material spread coating on the pending-repair areas layer by layer,the first layer should be compacted,make it infiltrate fully with the substrates.
If the following working procedure needs machining,should keep out appropriate machining allowance

4.Curing: Cure for 8 hours at the temperature of 25～30 degree before doing machining, cure for 24 hours before putting it into use,if the temperature is low,should heat it up or
prolong the curing time to promote the curing.

Packaging specification:
Two-component,250g/set,8 sets/carton or 16 sets/carton.

Transportation storage:
Sealed storage in the cool and dry place.The warranty period is 24 months.Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.

Product packaging photo of BD114 metal copper wear resistant two parts paste repair putty epoxy compound

------分隔线----------------------------